Customization: | Available |
---|---|
After-sales Service: | Technical Support |
Warranty: | 3months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Introduction
The extraction instrument owing the functions of temperature control, oscillation and blending, can crack sample and release the nucleic acid under the appropriate conditions, blend the magnetic beads with nucleic acid, elute and release the nucleic acid, transfer and separate the magnetic bead through magnetic device, at last extract the nucleic acid material from the samples. Instrument can extract a single sample or 32 samples at the same time, the user can edit experiment procedure, monitor experiment condition, open or close the ultraviolet light disinfection functions through the touch screen.Parameter name | Technical parameters | ||
M3201 | |||
Operating principle | Magnetic beads method, use magnetic rods and tip comb |
||
Sample throughput | 1-32 | ||
Working volume | 20ul-1000ul | ||
Sample volume | ≤5000 ul | ||
Consumables supported | 24-well deep-well plate |
||
Magnetic rods quantity | 24 | ||
Purification variation of wells | CV≤5% | ||
Heating temperature | Room temperature to 125oC | ||
Temperature accuracy | 2% | ||
Oscillating mixing | Tip comb moves up and down to mix, 11 different mixing modes including a speed-shift method |
||
Recovery rate of magnetic beads | >95% | ||
Extraction duration | 10-60 min/batch (experiment depended) | ||
Pollution prevention and control | Internal UV lamp, air filtration system | ||
Operation mode | Touch control | ||
Communication interface | USB2.0 x 2, USB3.0 x 1, audio output x 1, WAN x 1, internal WIFI, blue-tooth |
||
Program management | Create, edit, rename, save-as and delete programs | ||
Power supply | AC 200-240V/100-120V, 50Hz/60Hz; Power: 800VA | ||
Operating environment | Temperature: 10ºC-30ºC, Humidity: ≤80% | ||
Shape dimensions | 435mm * 340mm * 450mm(W*D*H) | ||
Instrument's weight | About 29KG |
No. |
Name |
Function |
1 |
Magnetic rod module |
For absorb and transfer magnetic beads |
2 |
Tip comb holder |
For installation of tip comb consumables |
3 |
Shield plate |
Used to prevent the liquid from dropping into plates when the tip comb is raised |
4 |
Six-block mobile module |
Used to move all plates horizontally |
5 |
Heating block |
For heating deep-well plates |
6 |
Touching control module |
For control the operation of the device |
7 |
Air filtration system |
It is used to control the airflow in the instrument cabin |